Disconetto bruger cookies til at indsamle statistik, der kan være med til at forbedre brugeroplevelsen. Cookies er vigtige for at vores website vises korrekt i din browser. Hvis du klikker på et link på vores website, accepterer du samtidig vores cookiepolitik.
0
Kurv: 0,00 DKK
Find produkt
 

Tascam US-20x20 USB 3.0 Audio interface med 20 in/out

Tascam US-20x20  USB 3.0 Audio interface med 20 in/out
  • Ikke på lager 
  • Ej på lager, Kontakt os.
  • Bedømmelse for Tascam US-20x20 USB 3.0 Audio interface med 20 in/out
    Produktet er endnu ikke bedømt
  •  
    3.949,00DKK ved 1 stk.
Vis uden moms 
Billigst på PriceRunner


US-20x20 er designet til brug i professionelle optagelsesfaciliteter eller projektstudioer. Lyd-interfacen understøtter 192 kHz og benytter USB 3.0.

Tascam US-20x20 USB 3.0 Audio interface med 20 in/out

US-20x20 er designet til brug i professionelle optagelsesfaciliteter eller projektstudioer. Lyd-interfacen understøtter 192 kHz og benytter USB 3.0. Med egenskaber som Mic Preamp-Mode og Mixer-Mode er den et meget alsidigt værktøj og samtidigt en interface til multi-channel recording. Mikrofon-forforstærkere er nødvendige hvis den højest mulige lydkvalitet skal opnås. De otte Tascam Ultra-HDDA mic-preamps har en tilsvarende input-støj (EIN) på -125 dB. 20 dB headroom på mikrofon- og line-inputs gør det let at håndtere høj SPL-forbigåelse fra slagtøj og instrumenter. US-20x20 bruger en Blackfin processor med høj ydeevne og tilbyder en avanceret DSP-mixer med EQ, kompression og reverb-effekter på hver kanal. Processoren tilbyder også multi-channel transmission via USB 3.0.

Sampling frequencies: USB 3.0: 44.1/48/88.2/96/176.4/192 kHz, USB 2.0: 44.1/48/88.2/96 kHz
Quantization bit depth: 16/24-bit
Mic inputs (balanced, IN1–IN8): XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
Input impedance: 2.4 kO
Nominal input level (gain knob at MAX): -68 dBu (0.0003 Vrms)
Nominal input level (gain knob at MIN): -12 dBu (0.195 Vrms)
Maximum input level: +8 dBu (1.947 Vrms)
Gain range: 56 dB
Instrument inputs (unbalanced, IN1–IN2): 6.3mm (1/4") standard TS jacks (Tip: HOT, Sleeve: GND)
Input impedance: 1 MO or more
Nominal input level (gain knob at MAX): -68 dBV (0.0004 Vrms)
Nominal input level (gain knob at MIN): -12 dBV (0.251 Vrms)
Maximum input level: +8 dBV (2.512 Vrms)
Gain range: 56 dB
Line inputs (balanced, IN1–IN8): 6.3mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 10 kO
Nominal input level (gain knob at MAX): -52 dBu (0.0019 Vrms)
Nominal input level (gain knob at MIN): +4 dBu (1.228 Vrms)
Maximum input level: +24 dBu (12.282 Vrms)
Gain range: 56 dB
Line inputs (unbalanced, LINE IN 9–10, LEVEL switch set to -10dBV): 6.3 mm (1/4") standard TS jacks (Tip: HOT, Sleeve: GND)
Input impedance: 10 kO
Nominal input level: -10 dBV (0.3162 Vrms)
Maximum input level: +10 dBV (3.162 Vrms)
Line inputs (balanced, LINE IN 9–10, LEVEL switch set to +4dBu): 6.3 mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 10 kO
Nominal input level: +4 dBu (1.228 Vrms)
Maximum input level: +24 dBu (12.282 Vrms)
Line outputs (balanced, LINE OUT 1–10): 6.3 mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Output impedance: 100 O
Nominal output level: +4 dBu (1.228 Vrms)
Maximum output level: +24 dBu (12.277 Vrms)
Headphones outputs (PHONES 1/2): 6.3 mm (1/4") standard stereo jacks
Maximum output power: 70mW + 70mW (THD+N 0.1% or less, into 32 O load)
Frequency response (Input to PHONES 1/2 output)
At 44.1 kHz and 48 kHz: 20 Hz – 20 kHz, ±1.0 dB (JEITA)
At 88.2 kHz and 96 kHz: 20 Hz – 40 kHz, ±2.0 dB (JEITA)
At 176.4 kHz and 192 kHz: 20 Hz – 80 kHz, ±5.0 dB (JEITA)
COAXIAL IN: RCA pin jacks
Signal format: IEC 60958-3 (S/PDIF)
Input impedance: 75 O
Input level: 0.5 Vpp/75 O
COAXIAL OUT: RCA pin jacks
Signal formats: IEC 60958-3 (S/PDIF) or IEC 60958-4 (AES/EBU), selectable on the Settings Panel
Output impedance: 75 O
Output level: 0.5 Vpp/75 O
OPTICAL (S/MUX) IN/OUT: OPTICAL (JEITA RC-5720C)
Signal format: Multi-channel optical format (supports S/MUX at 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz)
USB: USB 3.0 B type
Transfer rate: USB 3.0 Super Speed (5 GBit/s)
MIDI IN: 5-pin DIN
Format: standard MIDI
MIDI OUT: 5-pin DIN
Format: standard MIDI
WORD IN: BNC (Termination on/off switch included)
Input voltage: 2.0Vpp - 5.0Vpp
Input impedance: 75 O ±10 %
Permitted frequency deviation during external synchronization: ±100 ppm
WORD OUT: BNC (OUT/THRU switch included)
Output voltage: 2.0 Vpp (into 75O load)
Output impedance: 75 O ±10 %
Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Mic amp EIN (equivalent input noise): -125 dBu or lower
Frequency response (Input to LINE OUT (BALANCED))
At 44.1/48 kHz: 20 Hz – 20 kHz, ±0.5 dB (JEITA)
At 88.2/96 kHz: 20 Hz – 40 kHz, ±0.5 dB (JEITA)
At 176.4/192 kHz: 20 Hz – 80 kHz, ± 5 dB (JEITA)
S/N ratio: 104 dB or higher (MIC/LINE IN to LINE OUT, gain knob at MIN, JEITA)
Distortion: 0.004 % or less (MIC/LINE IN to LINE OUT, 1 kHz sine wave, at nominal input level and maximum output level)
Crosstalk: 100 dB or more (MIC/LINE IN to LINE OUT, 1 kHz)
Important note: Operation of this unit was confirmed using standard computers that meet the above requirements. This does not guarantee operation with all computers that meet the above requirements. Even computers that meet the same system requirements might have processing capabilities that differ according to their settings and other operating conditions
Windows
Supported operating system, USB 3.0: Windows 10 32/64-bit
Supported operating systems, USB 2.0: Windows 8 (including 8.1) 32/64-bit, Windows 7 32/64-bit SP1 or later (Windows Vista and Windows XP are not supported)
Computer hardware requirements: Windows computer with a USB 3.0 or USB 2.0 port
CPU/processor speed: 2 GHz or faster dual core processor (x86)
Memory: 2 GB or more
Screen resolution: 1280×800 pixels or more
Mac OS X
Supported operating system, USB 3.0: OS X El Capitan (10.11.2 or later)
Supported operating systems, USB 2.0: OS X Yosemite (10.10.1 or later), OS X Mavericks (10.9.5), OS X Mountain Lion (10.8.5)
Computer hardware requirements: Mac with a USB 3.0 or USB 2.0 port
CPU/processor speed: 2 GHz or faster dual core processor
Memory: 2 GB or more
Screen resolution: 1280×800 pixels or more
Apple iOS devices
Operating system: iOS 7 or later
Supported audio drivers: Windows: USB Audio Class 2.0, ASIO 2.0, WDM (MME), MIDI, Mac: Core Audio, Core MIDI
Power supply: DC12V AC adapter (GPE248-120200-Z)
Power consumption: 20 W
Dimensions (W x H x D): 445 x 59 x 222 mm (with standard frame attached), 483 x 44 x 222 mm (with rack mount adapters attached)
Weight: 2.7 kg
Permissible operating temperature range: 5–35 °C

 
Varenr.: TAS-US20X20
Disconetto.dk@2018