Tascam DR-44 WL håndholdt stereo optager
DR-44WL tilbyder et par stereo kondensatormikrofoner af højkvalitet, arrangeret i et XY-mønster. Mikrofonerne kan håndtere høje lydtryk uden forvrængning. To låsende XLR-inputs til eksterne mikrofoner er også tilgængelige. Med fire uafhængige optagelsesspor, en indbygget mixer med reverb-effekt, plus en bounce-egenskab er DR-40WL istand til at skabe multitrack-optagelser. Den kan også optage to spor i forskellige formater (WAV / MP3), eller med forskellige niveau-indstillinger.
Recording media: SD card (64 MB – 2 GB), SDHC card (4–32 GB), SDXC card (64–128 GB)
Recording/playback formats: BWF: 44.1k/48k/96kHz, 16/24 bit, WAV: 44.1k/48k/96kHz, 16/24 bit, MP3: 44.1k/48kHz, 32/64/96/128/192/256/320 Kbit/s
Number of channels: 4 channels
Recorded files, 4-channel mode: Mono: Up to 4 files, Stereo: Up to 2 files, Stereo (1 file) + mono (up to 2 files)
Recorded files, multitrack mode: Mono: Up to 4 files
EXT MIC/LINE IN jack (supporting phantom power supply): Combo type, XLR-3-31 (1: GND, 2: HOT, 3: COLD), 6.3-mm TRS standard jack (Tip: HOT, Ring: COLD, Sleeve: GND)
When EXT IN switch set to MIC or MIC+PHANTOM: Input impedance
2.2 kΩ or more: Reference input level
–17.3 dBu ±2 dB: Maximum input level
–1.3 dBu ±2 dB: When EXT IN switch set to LINE
Input impedance: 2.2 kΩ or more
Reference input level: +4 dBu
Maximum input level: +20 dBu
Phones/LINE OUT jack: 3.5-mm stereo mini jack
Output impedance: 12 Ω
Reference output level: -14 dBV (at 10 kΩ load)
Maximum output level: +2 dBV (at 10 kΩ load)
Maximum output power: 20 mW + 20 mW (at 32 Ω load)
Built-in speaker: 0.3 W (mono)
USB port: Micro-B type
Format: USB 2.0 HIGH SPEED mass storage class
Frequency response (EXT IN to LINE OUT): 20 Hz – 20 kHz +1/−3 dB (44.1 kHz, JEITA), 20 Hz – 22 kHz +1/−3 dB (48 kHz, JEITA), 20 Hz – 40 kHz +1/−3 dB (96 kHz, JEITA)
Distortion (EXT IN to LINE OUT): 0.05% or less (44.1/48/96 kHz, JEITA)
S/N ratio (EXT IN to LINE OUT): 92 dB or higher (44.1/48/96 kHz, JEITA)
Note: Measurements based on JEITA CP-2150
Windows: Pentium 300 MHz or more, 128 MB or more memory, USB port (USB2.0 is recommended)
Mac: Power PC, iMac, G3, or G4 with 266 MHz or higher, 64MB or more memory, USB port (USB2.0 is recommended)
Recommended USB host controller: Intel chip set
Supported operating systems: Windows XP, Windows Vista, Windows 7, Windows 8 (including 8.1), Mac OS X 10.2 or later
Wi-Fi standard: IEEE 802.11b/g/n (2.4 GHz only)
Wireless communication mode: Simple access point (Limited AP)
WiFi security: WPA2-PSK (WPS2.0 compatible)
Power supply: 4 AA batteries (alkaline or NiMH), USB bus power from a computer, Dedicated AC adapter (GPE053B provided with unit), Dedicated AC adapter (TASCAM PS-P515U; sold separately)
Power consumption: 2.5W (maximum)
Dimensions (W x H x D): 79 x 162 x 43 mm
Weight: 346 g (including batteries), 251 g (excluding batteries)
Operating temperature: 0–40 °C
