The MAC TW1 is a powerful, silent tungsten wash light with a clean, even, soft-edged beam, a motorized zoom, rich CMY color mixing and both internal and external electronic dimming.
Features
· 1200 W tungsten halogen lamp
· CMY color mixing system
· Motorized zoom
· Fresnel and super-wide lens options
· Internal & external electronic dimming plus mechanical dimming
· Rapid strobe effects (up to 10 Hz)
· Pan and tilt range of 540°/242°
· Silent operation
· Modular design for easy maintenance and servicing
· Various front accessories for theatre, television and film applications
· IGBT or 80 V dimmer options for universal operating voltage
· Accepts 240 V, 230 V, 115 V or 80 V lamps
Se video af effekten her ! Physical
Length: 454 mm (17.9 in.)
Width: 362 mm (14.3 in.)
Height: 709 mm (27.9 in.), head straight up
Weight: 26.8 kg (59.1 lbs.), IGBT dimmer model
Weight: 27.4 kg (60.4 lbs.), 80 V dimmer model
Lamp
Type: 1200 W tungsten halogen
Approved lamps: Philips 1200/115, 1200/230 or 1200/240 FastFit, Philips Hi-Brite 1200/80 FastFit
Socket: PGJX-50
Lamp voltage must match internal or external dimmer output voltage
Dynamic Effects
Color mixing: CMY, independently variable 0 - 100%
Electronic dimming: Multi-voltage IGBT and 80 V internal dimmer options, 'plug and play' external dimming
Mechanical dimmer: 0 - 100%
Shutter: Strobe effect up to 10 Hz, random strobe
Zoom: Narrow 14° - 26°, Standard 20° - 41°, Very wide 97° - 105°
Pan: 540°
Tilt: 242°
Control and Programming
DMX channels: 14/20
Setting and addressing: Control panel with display
16-bit control: CMY, mechanical dimmer, electronic dimmer, zoom, pan & tilt
Movement control options: Tracking and vector
Dimming curve options: Various available
Protocol: USITT DMX512-A
Receiver: Opto-isolated RS-485
Firmware update: Serial upload via DMX link
Dimming System Options
Internal multi-voltage IGBT dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX
Internal 80 V dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX
External dimmer input: Intelligent lamp power control
Construction
Color(s): Black
Housing: Magnesium alloy, UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP 20
Installation
Orientation: Any
Mounting points: 2 pairs of 1/4-turn locks
Connections
AC power input: 3 m (9.8 ft.) integral cable without power plug
DMX data in/out: 3-pin and 5-pin locking XLR
External dimmer: Neutrik® Powercon®
Electrical
AC power: 100-120/200-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Main fuse: 20 A
Thermal
Lamp cooling: Patent-pending low noise ducted forced air system
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Maximum surface temperature, steady state, Ta=40° C: 200° C (392° F)
Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 4180 / 4160 BTU/hr.
Acoustic
Sound power level: 31 dBA (steady state, lamp on, effects static, Ta=20°C (68° F), test conditions ISO 3743-2:1994)