The new Stagebar 54L is a compact, powerful LED luminaire with a comprehensive color range, all-in-one simplicity and a tough temperament for the touring market. It functions as a pixel bar for displaying imagery and video or as a wash luminaire for floodlighting surfaces and stages.

Se video af effekten her !

Features
· 54 LEDS in 5 colors - Red, Green, Blue, Amber and White
· Consistent color with factory-calibrated pixels
· Choice of lens options: 29° (standard) or opaque diffuser
· All-in-one system with direct power & DMX inputs
· Loop-through wiring of power and data to reduce cabling
· Automatic heat management for optimum performance
· Auto sensing SMPS for worldwide compatibility
· Battery powered control menu for off-site set-up without power
· Choice of DMX control modes: RGB, RGBAW, HSI, HSIC



Physical
Length: 420 mm (16.5 in.), Stagebar 54S
Length: 630 mm (24.8 in.), Stagebar 54L
Width: 190 mm (7.5 in.)
Height: 105 mm (4.1 in.)
Weight: 5.5 kg (12.1 lbs.) without bracket, Stagebar 54S
Weight: 7.3 kg (16.1 lbs.) without bracket, Stagebar 54L

Dynamic Effects
Color mixing: RGBAW, RGB, HSI, HSIC, 0 - 100% independently variable

Control and Programming
DMX channels: 3 - 30
Grouped pixel control options: 6 x 1 (individual), 3 x 2, 2 x 3 or 1 x 6 (all as one group) pixels
DMX address setting: Manual, auto addresssing and auto address copy
Fixture setup: Onboard control panel with display
Display: Battery-powered backlit LCD, 2 x 16 characters
16-bit control (internal): RGBAW, RGB, HSI, HSIC color mixing
Color calibration: Automatic correction system, software-assisted calibration package available as accessory
Protocol: USITT DMX512-A
Receiver: RS-485
Firmware update: Serial upload via DMX link

Photometric Data
Light source: Luxeon K2 high power emitters
LED power per pixel: 2 x 1.2 W red, 2 x 2.9 W green, 2 x 2.9 W royal blue, 2 x 1.2 W amber, 1 x 2.9 W white
Total LED power per bar: 116 W
Even pitch across adjacent fixtures: Horizontal/vertical (Stagebar 54L), horizontal (Stagebar 54S)
Total output (max.): 1900 lm

Construction
Color: Black
Housing: Steel and aluminum
Finish: Electrostatic powder-coated
Protection rating: IP 20

Installation
Mounting points: Adjustable mounting bracket, 1/4-turn locks, four M6 threaded holes
Orientation: Any

Connections
Power in/out: Neutrik® Powercon®
Data in/out: RJ-45

Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Integrated, auto-sensing multi-voltage
Power output fuse: 15 AT (slow blow)
Main fuse: 3.15 AT (slow blow)

Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F)
Total heat dissipation (calculated, +/- 10%): 860 BTU/hr.

Acoustic
Noise level: <40 dBA at 1 m (3.3 ft.), steady state, Ta 25° C (77° F)