The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog.

Se video af effekten her !

Features
· Output and density level control
· Continuous output
· 5000 m³/min fog output
· Integrated high velocity fan
· 2 x 2500 W heat exchanger
· 18 min heat-up time
· For vertical or horizontal effect projection
· 2 x 9.5 liter fluid capacity
· Different fluid options for different applications
· Low fluid sensing
· Onboard DMX
· On-board control panel
· Optional hand-held remote control



Physical
Length: 1140 mm (44.9 in.)
Width: 645 mm (25.4 in.)
Height: 655 mm (25.8 in.)
Dry weight: 167 kg (368.2 lbs.)

Performance
Max. fog output (approx.): 5000 m3 per minute
Max. operating time at full output (approx.): 108 minutes
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 18 minutes

Control and Programming
Control options: Onboard control panel, DMX
Compatible remote controls: For limited control
DMX channels: 2 (output and fan)
Protocol: USITT DMX512/1990

Construction
Housing: Steel & aluminum
Heat exchanger: 2 x 2500 W, direct thermal protection

Fluid System
Fluid pump: Oscillating piston, high pressure X4
Onboard fluid capacity: 2 x 9.5 l
Fluid consumption at peak output: 500 ml per minute

Installation
Orientation: Floor or flying kit

Connections
Remote control: 3-pin locking XLR
DMX data: 3-pin locking XLR
Power cable entry: IEC-EN60309-2 Socket (Cee Type)

Electrical
AC power: 220-240 V nominal, 50 Hz
Main fuse (220-240 V power): Onboard 25 A Breaker

Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 50° C (122° F)
Max. nozzle temperature: 200° C (392° F)