Hydra er et multi-headed tåge-generator, som giver dig fuld fleksibilitet i tåge placering ved maksimalt 16 DMX kontrolleret produktion hoveder, alle serviceres af en centraliseret base.

Hver udgang hovedet kan placeres op til en fantastisk 150 m (330 m) fra basen og skød på efterspørgslen gennem en bred vifte af output - fra blid Haze til en blændende tæt tåge. Hver virkning for hvert eneste øjeblik.

Hvert hoved er blevet fodret væske fra bunden og kan være individuelt synkroniseres i bølger af forskellige resultater og virkninger, eller samles til en enkelt, uhyre tåge brast.

Se video af effekten her !

Features
· Central base allows heads to be positioned up to 300 meters apart
· Continuous output
· 700 m³/min fog output (per head)
· 1500 W heat exchanger
· 9 min heat-up time
· Can be mounted in any direction
· 2 x 25 liter fluid capacity
· Temperature control for different fluid options and applications
· Automatic tank changeover
· Low fluid sensing
· Leak detection system
· Optional self-sealed connectors for easy service
· System is DMX controllable
· Pre-programmed stand-alone macros
· On-board control panel
· Optional multifunctional remote control



Physical
Length (Head): 440 mm (17.3 in.)
Width (Head): 392 mm (15.4 in.)
Height (Head): 167 mm (6.6 in.)
Dry Weight (Head): 13.8 kg (30.4 lbs.)

Length (Base): 664 mm (26.1 in.)
Width (Base): 392 mm (15.4 in.)
Height (Base): 939 mm (37.0 in.)
Dry weight (Base): 35 kg (77.2 lbs.) incl. two empty 25 l drums

Performance
Max. fog output (approx.): 700 m3 per minute per head
Max. operating time at full output (approx.): 60 minutes (full 16-head system)
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 9 minutes

Control and Programming
Control options: Onboard control panel, DMX
Instant or timer-controlled variable output
Output is proportional for all levels above 12%
DMX channels: 1 per head, maximum 16
Protocol: USITT DMX512/1990
Optional digital remote control: For limited control

Construction
Housing: Steel & aluminum
Heat exchanger: 1500 W, direct thermal protection

Fluid System
Fluid pump: Low pressure pump in Base Unit supplies constant 2.5 bar pressure
Pump (EP5) in Head Unit increases 2.5 bar inlet pressure to 16 bar
Solenoid valve in Head Unit for instant cut-off
Onboard fluid capacity: 2 x 25 l
Fluid consumption at peak output: 120 ml per minute per head